Q Do we need power at the weighframe
A No. Power is required at the Integrator and this in turn supplies
the power to the weighframe.
Q What type of cable is required.
A Either 1.0mm2 or 1.5mm2 Steel Wire Armoured or SY type Flexible
Armoured
Q How many cores should the cable have.
A 7 cores. 4 for the Load Cell and 3 for the Speed Sensor.
Q How far can I run the cable.
A Several hundred metres (but please check if the cable run is
very long)
Q Can we install the system ourselves.
A Yes. Installation is very easy and WestWeigh are always available
to provide telephone support when/if required.
Q Can WestWeigh install the system for us.
A Yes. Fully trained staff are available to install the products
if required. We will be happy to quote when we know the location.
Q Can you supply an integrated printer for the Batch and Shift
Performance Report.
A Yes. This is available as an optional extra.
Q Do we need to take out a service contract.
A NO. No routine maintenance is required. WestWeigh provide free
telephone technical support for the life of the product and we
can normally solve most problems over the telephone and assist
with any calibration issues. WestWeigh will however provide service
and calibration contracts if this is a requirement of the company.
